At present, smart toilets are mainly divided into instant heating and thermal storage, and perhaps most people do not realize the difference between the two. It can be understood from the following aspects.

Big difference in heating methods- Since the instant smart toilet has no water storage tank, it can directly heat the flowing water, but its heating power is relatively large. The heating power of the heat storage smart toilet is relatively small. Due to the use of a water storage tank, it is generally equipped with water pressure regulation, and the flushing water flow rate is relatively large. Of course, the disadvantages are also obvious, that is, the long-term water storage tank is prone to breed bacteria, and you need to replace the water frequently and clean the cistern regularly.

Significant difference in energy saving effect- Instantaneous smart toilets are relatively better at saving energy because instant heated smart toilets only heat up when they are in use. In order to maintain the water temperature in the cistern, the heat storage smart toilet must be continuously heated for 24 hours. Once the water temperature in the cistern is lower than a certain temperature, it will be automatically heated, which consumes more power.

Varying degrees of convenience- If the thermal storage smart toilet is powered off and then restarted, it takes a while to use the warm water function, but the instant heating type does not need to wait. With just one touch of a button, warm water is ready to use, saving time and worry.

Prices vary- In terms of price, instant smart toilets are relatively more expensive.

Security is different- The heating device in the heat storage intelligent toilet tank is directly built into the water, and the principle is the same as "hot fast". The security risks are self-evident. Once the safety protection technology is not up to standard, accidents such as water leakage and electricity leakage will pose a great threat to the safety of users. The instant smart toilet uses a ring-shaped ceramic heating element. The heating element is built into the ceramic, and the heating element is isolated from the water through the ceramic, so as to achieve the design of water and electricity separation, which plays the role of protection and insulation. At the same time, the instant heating type also has protective devices such as anti-leakage, anti-overtemperature, anti-overpressure, anti-dry heat, etc., and the safety factor is relatively high.

Oceanwell has a series of smart toilets to choose from, welcome to consult.